OpenConfig Telemetry

OpenConfig is an open-source initiative by network operators to develop vendor-neutral data models, programmatic interfaces, and tools for managing networks.

The OpenConfig client lets you stream OpenConfig telemetry data over gRPC to Meridian. Some vendors currently using OpenConfig telemetry include Juniper, Arista, and Cisco.

To enable support for OpenConfig, edit $OPENNMS_HOME/etc/telemetryd-configuration.xml to set enabled=true for the OpenConfig protocol.

The OpenConfig protocol is not supported on Minion.

Enable OpenConfig protocol in telemetryd-configuration.xml

<!-- OpenConfig -->
<connector name="OpenConfig-Connector"
            class-name="org.opennms.netmgt.telemetry.protocols.openconfig.connector.OpenConfigConnector"
            service-name="OpenConfig"
            queue="OpenConfig"
            enabled="true">
    <package name="OpenConfig-Default">
        <filter>IPADDR != '0.0.0.0'</filter>
        <parameter key="port" value="${requisition:oc.port|9000}"/>
        <parameter key="paths" value="/network-instances/network-instance[instance-name=master]"/>
    </package>
</connector>

<queue name="OpenConfig">
    <adapter name="OpenConfig-Adapter" class-name="org.opennms.netmgt.telemetry.protocols.openconfig.adapter.OpenConfigAdapter" enabled="true">
        <parameter key="script" value="$OPENNMS_HOME/etc/telemetryd-adapters/openconfig-telemetry-resources.groovy"/>
        <package name="OpenConfig-Default">
            <rrd step="300">
                <rra>RRA:AVERAGE:0.5:1:2016</rra>
                <rra>RRA:AVERAGE:0.5:12:1488</rra>
                <rra>RRA:AVERAGE:0.5:288:366</rra>
                <rra>RRA:MAX:0.5:288:366</rra>
                <rra>RRA:MIN:0.5:288:366</rra>
            </rrd>
        </package>
    </adapter>
</queue>

Apply the changes without restarting by sending a reloadDaemonConfig event in the CLI or the Web UI:

Send a reloadDaemonConfig event through CLI

$OPENNMS_HOME/bin/send-event.pl -p 'daemonName Telemetryd' uei.opennms.org/internal/reloadDaemonConfig

OpenConfig connector

OpenConfig Connector initiates a connection with an agent via gRPC and subscribes to one or more OpenConfig data paths (strings), then collects and forwards the data to a queue. The data contains metadata and is structured as a list of key:value pairs.

Meridian creates a new connector for each agent it is responsible for connecting to.

Connector configuration

<connector name="OpenConfig-Connector"
            class-name="org.opennms.netmgt.telemetry.protocols.openconfig.connector.OpenConfigConnector"
            service-name="OpenConfig"
            queue="OpenConfig"
            enabled="true">
    <package name="OpenConfig-Default">
        <filter>IPADDR != '0.0.0.0'</filter>
        <parameter key="port" value="${requisition:oc.port|9000}"/>
        <parameter key="retries" value="12"/>
        <parameter key="interval" value="300"/>
        <parameter key="username" value="admin"/>
        <parameter key="password" value="admin"/>
        <parameter key="tls.enabled" value="${requisition:oc.tls.enabled}"/>
        <parameter key="tls.trust.cert.path" value="${requisition:trust.cert.path}"/>
        <!-- Use groups to separate paths that need to be streamed at different frequencies -->
        <parameter group="group1" key="paths" value="/network-instances/network-instance[instance-name=master]"/>
        <parameter group="group1" key="frequency" value="5000"/>
        <parameter group="group2" key="paths" value="/protocols/protocol/bgp"/>
        <parameter group="group2" key="frequency" value="30000"/>
        <parameter group="group3" key="paths" value="/interfaces/interface[name=Ethernet1][ifIndex=25]/state/counters"/>
        <parameter group="group3" key="frequency" value="60000"/>
    </package>
</connector>

Service

For any interface that needs to enable OpenConfig streaming, we need to add a service on a given interface. This denotes service-name in above configuration which is defined as OpenConfig.

Packages

At least one package must be present for the connector to function. Use multiple packages to customize the parameter’s subsets of nodes.

The filter element is optional. If missing, all services with the given name will be considered.

Use the group element to group parameters into multiple groups when you need to stream different paths at different frequencies. Global parameters like port, and connection-specific parameters, do not need any group.

Parameters are passed to the connector and are interpolated for node/interface and service-level metadata.

Table 1. Connector-specific parameters for the OpenConfigConnector
Parameter	Description	Default
Required
port	Port that OpenConfig client can connect to.	none
paths	Paths that need to be subscribed to.	none
frequency	Frequency at which OpenConfig data can be streamed. This is parsed as milliseconds(ms) for jti and nanoseconds(ns) for gnmi	300000
Optional
retries	Number of retries to attempt to make a connection when failed.	0
interval	Interval at which client tries to make a connection when failed in seconds.	300
hostname	The HostName OpenNMS needs to make a gRPC connection instead of using Node primary IpAddress.	none
tls.enabled	Enable TLS authentication.	false
tls.trust.cert.path	Root CA certificate for verifying server certs	none
tls.client.key.path	Client private key path	none
tls.client.cert.path	Client public certificate path	none
tls.skip.verify	Skip TLS signature verification (TLS certs are still used, test purposes only)	false
origin	Origin that need to be subscribed to, only relevant for gnmi.	openconfig
username	Username that can be used to authenticate, sent as metadata to the server.	none
password	Password that can be used to authenticate, sent as metadata to the server.	none
mode	Specify mode for stream format. Options include gnmi or jti.	gnmi

OpenConfig adapter

The OpenConfig adapter handles OpenConfig payloads. Messages are decoded and forwarded to a JSR-223-compatible script (for example, BeanShell or Groovy) for further processing. Use the script extension to extract the desired metrics from the OpenConfig stream data and persist the results as time series data.

Facts

Class Name

org.opennms.netmgt.telemetry.protocols.openconfig.adapter.OpenConfigAdapter

Configuration and use

Table 2. Adapter-specific parameters for the OpenConfigAdapter
Parameter	Description	Default
Required
script	Full path to the script that handles the OpenConfig data.	none
Optional
mode	Specify mode for stream format. Options include gnmi or jti. Options are `gnmi` or `jti`.	gnmi

Scripting

The script will be invoked for every OpenConfig stream data that is received and successfully decoded.

The following globals will be passed to the script:

Table 3. Globals passed to the script for gNMI (default) mode.
Parameter	Description	Type
agent	The agent (node) against which the metrics will be associated.	org.opennms.netmgt.collection.api.CollectionAgent
builder	Builder in which the resources and metrics should be added.	org.opennms.netmgt.collection.support.builder.CollectionSetBuilder
msg	Decoded message from which the metrics should be extracted.	org.opennms.features.openconfig.proto.gnmi.Gnmi.SubscribeResponse

Table 4. Globals passed to the script for JTI mode.
Parameter	Description	Type
agent	The agent (node) against which the metrics will be associated.	org.opennms.netmgt.collection.api.CollectionAgent
builder	Builder in which the resources and metrics should be added.	org.opennms.netmgt.collection.support.builder.CollectionSetBuilder
msg	Decoded message from which the metrics should be extracted.	org.opennms.features.openconfig.proto.jti.Telemetry.OpenConfigData