CiscoIpSlaMonitor

Use this monitor to monitor IP SLA configurations on your Cisco devices. This monitor supports the following SNMP OIDS from CISCO-RTT-MON-MIB:

RTT_ADMIN_TAG_OID = .1.3.6.1.4.1.9.9.42.1.2.1.1.3
RTT_OPER_STATE_OID = .1.3.6.1.4.1.9.9.42.1.2.9.1.10
RTT_LATEST_OPERSENSE_OID = .1.3.6.1.4.1.9.9.42.1.2.10.1.2
RTT_ADMIN_THRESH_OID = .1.3.6.1.4.1.9.9.42.1.2.1.1.5
RTT_ADMIN_TYPE_OID = .1.3.6.1.4.1.9.9.42.1.2.1.1.4
RTT_LATEST_OID = .1.3.6.1.4.1.9.9.42.1.2.10.1.1

You can run this monitor in two scenarios. The first tests the RTT_LATEST_OPERSENSE, which is a sense code for the completion status of the latest RTT operation. If the RTT_LATEST_OPERSENSE returns ok(1), the service is marked as up.

The second scenario monitors the configured threshold in the IP SLA config. If the RTT_LATEST_OPERSENSE returns with overThreshold(3), the service is marked down.

Monitor facts

Class Name

org.opennms.netmgt.poller.monitors.CiscoIpSlaMonitor

Configuration and use

Table 1. Required monitor-specific parameters for the CiscoIpSlaMonitor
Parameter Description Default

admin-tag

The tag attribute from the IP SLA configuration you want to monitor.

n/a

ignore-thresh

Boolean indicates whether to monitor just the status or the configured threshold.

n/a

This monitor implements the Common Configuration Parameters.

Example for HTTP and ICMP echo reply

In this example, we configure an IP SLA entry to monitor Google’s website with HTTP GET from the Cisco device. We use 8.8.8.8 as our DNS resolver. In our example, our SLA says we should reach Google’s website within 200ms. To advise co-workers that this monitor entry is used for monitoring, we set the owner to OpenNMS. The tag identifies the entry later in the SNMP table for monitoring.

Cisco device configuration for IP SLA instance for HTTP GET
ip sla monitor 1
 type http operation get url http://www.google.de name-server 8.8.8.8
 timeout 3000
 threshold 200
 owner OpenNMS
 tag Google Website
ip sla monitor schedule 3 life forever start-time now

In the second example, we configure an IP SLA to test if the IP address from www.opennms.org is reachable with ICMP from the perspective of the Cisco device. As in the example above, we have a threshold and a timeout.

Cisco device configuration for IP SLA instance for ICMP monitoring.
ip sla 1
 icmp-echo 64.146.64.212
 timeout 3000
 threshold 150
 owner OpenNMS
 tag OpenNMS Host
ip sla schedule 1 life forever start-time now
It’s not possible to reconfigure an IP SLA entry. To change parameters, you have to delete the whole configuration and reconfigure it with your new parameters. Back up your Cisco configuration manually, or see RANCID.

To monitor both of the entries, the configuration in poller-configuration.xml requires two service definition entries.

Note that you must include the monitor section for each service in your definition.

<service name="IP-SLA-WEB-Google" interval="300000"
  user-defined="false" status="on">
    <parameter key="retry" value="2" />
    <parameter key="timeout" value="3000" />
    <parameter key="admin-tag" value="Google Website" />
    <parameter key="ignore-thresh" value="false" />(1)
</service>
<service name="IP-SLA-PING-OpenNMS" interval="300000"
  user-defined="false" status="on">
    <parameter key="retry" value="2" />
    <parameter key="timeout" value="3000" />
    <parameter key="admin-tag" value="OpenNMS Host" />
    <parameter key="ignore-thresh" value="true" />(2)
</service>

<monitor service="IP-SLA-WEB-Google" class-name="org.opennms.netmgt.poller.monitors.CiscoIpSlaMonitor" />
<monitor service="IP-SLA-PING-OpenNMS" class-name="org.opennms.netmgt.poller.monitors.CiscoIpSlaMonitor" />
1 Service is up if the IP SLA state is ok(1).
2 Service is down if the IP SLA state is overThreshold(3).