IS-IS Discovery
The ISIS Topology Updater provides ISIS OnmsTopology, consolidating IS-IS data ISIS Collector collects. Only full bidirectional connections between two ISIS-supported devices become edges. Node A and Node B are connected by an ISIS edge if and only if there is an ISIS link in Node A to Node B and vice versa.
IS-IS links are found in the isisISAdjTable defined in ISIS-MIB. This table has the information needed to find the Adjacency Intermediate System. The information about IS-IS is stored into two tables: isisElement and isisLink. isisElement contains the ISISSysID, a unique identifier of the Intermediate-System (the name for the router in ISO protocols). Each entry in this SNMP MIB table represents a unidirectional link from the Intermediate-System that is queried to the Adjacent Intermediate Systems running IS-IS and "peering" with the source router. If two routers IS-A and IS-B support ISIS-MIB, then Enlinkd creates two link entries in Meridian: one from IS-A to IS-B (from the adjtable of IS-A) and the complementary link back from IS-B to IS-A (from the adjTable of IS-B). IS-IS links are represented in the ISIS-MIB as in the table below.
The following OIDs are supported to discover and build the ISIS network topology and are collected by the ISIS Discovery Collector.
| Name | Description | OID |
|---|---|---|
isisSysID |
The ID for this Intermediate-System. This value is appended to each of the area addresses to form the Network Entity Titles. The derivation of a value for this object is implementation specific. Some implementations may automatically assign values and not permit an SNMP write, while others may require the value to be set manually. Configured values must survive an agent reboot. |
.1.3.6.1.2.1.138.1.1.1.3.0 |
isisSysAdminState |
The administrative state of this Intermediate-System. Setting this object to the value to "on" from "off" enables the Intermediate-System. Configured values must survive an agent reboot. |
.1.3.6.1.2.1.138.1.1.1.8.0 |
isisSysObject |
isisSysObject |
.1.3.6.1.2.1.138.1.1.1 |
isisCircIfIndex |
The value of ifIndex for the interface to which this circuit corresponds. You cannot modify this object after creation. |
.1.3.6.1.2.1.138.1.3.2.1.2 |
isisCircAdminState |
The administrative state of the circuit. |
.1.3.6.1.2.1.138.1.3.2.1.3 |
isisISAdjState |
The state of the adjacency. |
.1.3.6.1.2.1.138.1.6.1.1.2 |
isisISAdjNeighSNPAAddress |
The SNPA address of the neighboring system. |
.1.3.6.1.2.1.138.1.6.1.1.4 |
isisISAdjNeighSysType |
The type of the neighboring system. |
.1.3.6.1.2.1.138.1.6.1.1.5 |
isisISAdjNeighSysID |
The system ID of the neighboring Intermediate-System. |
.1.3.6.1.2.1.138.1.6.1.1.6 |
isisISAdjNbrExtendedCircID |
The 4-byte extended circuit ID learned from the neighbor during three-way handshake, or 0. |
.1.3.6.1.2.1.138.1.6.1.1.7 |
Find generic information about the IS-IS link discovery process in the IS-IS information box on the node detail page of the device. Information gathered from these OIDs is stored in the following database table:
