VmwareCimMonitor

This monitor is part of the VMware integration provided by Provisiond. The monitor is specialized to test the health status provided from all host system (host) sensor data.

This monitor only runs on VMware hosts and only if the power state "on". It does not apply to virtual machines.

This monitor requires hosts be imported with Provisiond and the VMware import. Meridian requires network access to VMware vCenter server and each of the monitored hosts. The credentials for accessing the status of a VMware entity are collected from the responsible VMware vCenter using the settings from $OPENNMS_HOME/etc/vmware-config.xml. The VMware integration populates the following via Provisiond:

  • VMware Management Server

  • VMware Managed Entity Type

  • foreignId (which contains an internal VMware vCenter Identifier)

The global health status is evaluated by testing all available host sensors and evaluating the state of each sensor. A sensor state could be represented as the following:

  • Unknown(0)

  • OK(5)

  • Degraded/Warning(10)

  • Minor failure(15)

  • Major failure(20)

  • Critical failure(25)

  • Non-recoverable error(30)

The service is up if all sensors have the status OK(5). If any sensor gives a status other than OK(5), the service is marked as down. The monitor error reason contains a list of all sensors that do not return status OK(5).

When using Distributed Power Management (automatic PDF download), the standBy state forces a service down. The health status is gathered with a direct connection to the host and in standby this connection is unavailable and the service is down. To deal with standby states, use the ignoreStandBy parameter to consider the service as up when using distributed power management. See the ignoreStandBy parameter below on how to change the state.

Monitor facts

Class Name

org.opennms.netmgt.poller.monitors.VmwareCimMonitor

Remote Enabled

false

Configuration and use

Table 1. Optional monitor-specific parameters for the VmwareCimMonitor
Parameter Description Default

retry

Number of retries before the service is marked as down.

0

ignoreStandBy

Treat power state standBy as up.

false

This monitor implements the Common Configuration Parameters.

Examples

Example configuration on how to configure the monitor in poller-configuration.xml.

<service name="VMwareCim-HostSystem" interval="300000" user-defined="false" status="on">
  <parameter key="retry" value="2"/>
  <parameter key="timeout" value="3000"/>
</service>

<monitor service="VMwareCim-HostSystem" class-name="org.opennms.netmgt.poller.monitors.VmwareCimMonitor"/>