Model Types The following types are supported using the built in Inventory Scripts: Node (node) Associates the alarm with a node object. There are no parameters required aside from the alarm being associated to a node. SNMP Interface (snmp-interface) Requires the ifIndex or ifDescr parameters to be set. When given an ifIndex it will be used as-is. When given an ifDescr we will attempt to lookup the associated ifIndex with the matching ifDescr or ifName on the node. SNMP Interface Link (snmp-interface-link) Requires the aIfDescr, zIfDescr and zHostname parameters to be set. BGP Peer (bgp-peer) Requires the bgpPeer parameters to be set. VPN Tunnel (vpn-tunnel) Requires the peerLocalAddr, peerRemoteAddr and tunnelId parameters to be set. MPLS L3 VRF (mpls-l3-vrf) Requires the vrfNameOid or vrfName parameter to be set. Entity-MIB Physical Entity (ent-physical-entity) Requires the entPhysicalIndex parameter to be set. OSPF Router (ospf-router) Requires the ospfRouterId parameter to be set. MPLS Tunnel (mpls-tunnel) Requires the mpls-tunnel parameter to be set. MPLS LDP Session (mpls-tunnel) Requires the mplsLdpEntityID parameter to be set. DBSCAN Engine